Stamperia

15cmX21cm

15cmX21cm

15cmX21cm

15cmX21cm

Moulds are very versatile decorative elements. If we want perfect moulds is important to pay attention to material used, proportions, times and molds characteristics. Maxi Moulds: they are soft and flexible to allow an easy extraction of the solidified product into the mould. In this way, we can offer more complex designs, rich of fine details. Use an MDF or similar base to keep the moulds in horizontal position. These Stamperia products can be used with the moulds - Stone Effect (FC04...) and Marble Effect (FC06...) Ceramic Powders: powder need to be diluted with water. For Stone effect the right mixture ratio is 700ml water / 1 Kg powder; for Marble effect 800ml water / 1 Kg powder. The final mixture must be semifluid (not thick, neither too much liquid). So, we can pour it into the moulds and we must to let it dry for 20 minutes at least. Stone Effect and Marble Effect Ceramic Powder. Available in 2 pack sizes: 400gr and 900gr Bicomponent White Resin (KEN06): it dries in 10 minutes on contact with air. It's liquid and transparent but, once dry, it becomes white and very resistant. It can be coloured with Colorink or acrylic colours. The right proportion between the two components is 1:1. Pasta Flash - Bicomponent Cast Paste (KEN05): 2 components, A and B, 1:1 ratio. It dries on contact with air. Mix the components in the same quantity and you will get a dough. Put the subject that you want to duplicate inside the dough. Once the dough will be dry, you have your mould and you can use it with resin, ceramic powder, soap, wax, etc... Resina bianca bicomponente e Pasta Flash Soap: Stamperia moulds and Maxi Moulds can be used to make soap, too. White (FG0...B) or transparent (FG0...T) soap must be warmed two minutes in the microwave oven. Once melted, it can be poured into the moulds. When it becomes cold, it can be removed from the moulds. Stamperia offers a line of soap colorants: yellow (CS002N), blue (CS003N) and red (CS004N).

Moulds are very versatile decorative elements. If we want perfect moulds is important to pay attention to material used, proportions, times and molds characteristics. Maxi Moulds: they are soft and flexible to allow an easy extraction of the solidified product into the mould. In this way, we can offer more complex designs, rich of fine details. Use an MDF or similar base to keep the moulds in horizontal position. These Stamperia products can be used with the moulds - Stone Effect (FC04...) and Marble Effect (FC06...) Ceramic Powders: powder need to be diluted with water. For Stone effect the right mixture ratio is 700ml water / 1 Kg powder; for Marble effect 800ml water / 1 Kg powder. The final mixture must be semifluid (not thick, neither too much liquid). So, we can pour it into the moulds and we must to let it dry for 20 minutes at least. Stone Effect and Marble Effect Ceramic Powder. Available in 2 pack sizes: 400gr and 900gr Bicomponent White Resin (KEN06): it dries in 10 minutes on contact with air. It's liquid and transparent but, once dry, it becomes white and very resistant. It can be coloured with Colorink or acrylic colours. The right proportion between the two components is 1:1. Pasta Flash - Bicomponent Cast Paste (KEN05): 2 components, A and B, 1:1 ratio. It dries on contact with air. Mix the components in the same quantity and you will get a dough. Put the subject that you want to duplicate inside the dough. Once the dough will be dry, you have your mould and you can use it with resin, ceramic powder, soap, wax, etc... Resina bianca bicomponente e Pasta Flash Soap: Stamperia moulds and Maxi Moulds can be used to make soap, too. White (FG0...B) or transparent (FG0...T) soap must be warmed two minutes in the microwave oven. Once melted, it can be poured into the moulds. When it becomes cold, it can be removed from the moulds. Stamperia offers a line of soap colorants: yellow (CS002N), blue (CS003N) and red (CS004N).

2 small individual stamps

6 Individual stamps

Approx 3.5 by 6cm

3 individual red rubber stamps - Small

2 individual stamps

1 red rubber stamp

Natural Rubber Stamp cm. 14X18 Steampunk

Stamperia Natural Rubber Stamp cm. 7x11 - Brushes WTKCC38

Natural Rubber Stamp cm.14x18 Christmas

Natural Rubber Stamp cm.7x11Texture bees

15cmX20cm

15cmX20cm

Size: 29,7cmX21cm

20cmX25cm

Stamperia A4 Stencil G - Alchemy Sun KSG403

Stamperia A4 Stencil G - Alphabet 2 KSG26

Stamperia A4 Stencil G - Ancient Keys and Writings KSG408

Stamperia A4 Stencil G - Atelier KSG401